This is a summary of the gatekeeper registration behavior on the IP VCR. It also explains how you can use a gatekeeper for load balancing.
With the exception of point-to-point prefixes (which are explained below), gatekeeper usage starts with configuring unique Numeric IDs for individual stored recordings and for folders. For each folder you can configure an Auto attendant ID, Recording ID and Recording console ID (together called folders IDs in this topic).
After configuring these IDs you can then:
You may need to use a prefix if:
You may not be able to use a prefix if: your gatekeeper does not support prefixes - not all gatekeepers offer this functionality.
A call can reach the IP VCR with a called ID number when:
When the IP VCR receives an incoming call involving a called ID, it decides what to do with the incoming call by following a number of rules in a specific order. If any of these rules provides a decision on what to do with the call, the process stops at that point and no further rules are tested. The rules in order are:
If the above sequence results in a match against a recording's Numeric ID, then the recording is played back. If a folder's Auto attendant ID is matched, then the endpoint is connected to the auto attendant menu for that folder. If the call matches a folder's Recording ID or Recording console ID, the IP VCR starts a new recording in that folder (and starts up a recording console, if appropriate).
No individual registration will be made for a recording unless the H.323 gatekeeper checkbox in the Numeric ID registration field is selected. In addition, if the recording is external (i.e. not stored on the IP VCR's own disk but accessed through a link to an external NFS server) the folder's Register external recordings with gatekeeper setting must be selected as well as the recording's own H.323 gatekeeper setting.
If the unit-wide Prefix for IP VCR registrations has not been configured, the IP VCR will register just the recording's Numeric ID. However, if the Prefix for IP VCR registrations has been configured and use as prefix for registrations is selected, the IP VCR will prepend that prefix to the recording's Numeric ID before registering it with the gatekeeper.
No folder IDs will be registered with the gatekeeper unless the unit-wide Register folder IDs setting is selected. If it is selected, then all configured Auto attendant IDs, Recording IDs and Recording console IDs for all folders will be registered with the gatekeeper.
If the Prefix for IP VCR registrations has been configured and use as prefix for registrations selected for this field, then the IP VCR will prepend that prefix to all folders IDs before registering them with the gatekeeper.
In normal operation, whenever a folder has a configured Point to point call incoming prefix, that prefix will be registered with the gatekeeper: there is no other unit-wide setting to enable or disable registration unlike the other folder IDs. However, see Load balancing below.
You can use prefixes to balance the load between a number of IP VCRs by registering them with the same prefixes and selecting the "deregister" options:
When deregistration occurs, the gatekeeper will chose another IP VCR which is registered with the same prefix when a call comes in rather than rejecting it.
One folder's Point to point incoming prefix can be the same as another folder's followed by some more digits; in this case the IP VCR will use the longest match to determine which folder to create a new point-to-point recording in. For example, if one folder uses the prefix "123" and another uses "1234", then calls to "12345" and "12346" will use the folder that registered "1234" and calls to "1235" and "1236" will use the folder associated with the prefix "123".
One folder's Point to point incoming prefix can be the same as a non-prefix ID; for example a recording can be registered as "1234" in addition to this being a folder's Point to point incoming prefix. In this case a call to "1234" will play back the recording, and a call to a number that starts with "1234" but has more than 4 digits will trigger a new point-to-point recording that will be stored in that folder.
A non-prefix ID can be the same as a folder's recording prefix plus some other digits. For example, you can have a recording registered as "1234" as well as a point to point incoming prefix "123" for a folder - the IP VCR always matches non-prefix IDs first; therefore a call to "1234" would go to the recording that had specifically registered this ID, whereas a call to "1235" or "1236" would start a point to point recording.
The following are not allowed:
|(c) Copyright Codian 2003-2008, License information|